Aerosol spray that’s ideal for painting awkward shapes and difficult to reach areas
PRODUCT DESCRIPTION
Trilux Prop-O-Drev . is a hard antifouling that is specially formulated for use on outdrives, outboard legs, propellers and sterngear.
* Aerosol spray is ideal for painting awkward shapes and difficult to reach areas.
* Quick and easy application saves you time and effort.
* Suitable for use on aluminium and stainless steel.
APPLICATION AND USE
Preparation Prime bare metal and factory enamelled surfaces with 2 coats of VC Prop-O-Drev Primer. This is essential on aluminium
and alloy as Trilux Prop-O-Drev . is NOT suitable for direct application. For best results on previously antifouled
surfaces, remove existing paintwork. Alternatively, abrade with wet 240 grade paper.
Method Spray sparingly 10-15 cm (4-10″) from the surface. Apply a minimum of 3 coats, allowing 30 mins between coats.
Hints Mixing Shake can vigorously. Once mixing ball is heard, shake for minimum 2 minutes prior to use. After spraying, invert
can and spray for 2 seconds to clean the nozzle.
Thinner VC General Thinner.
Cleaner VC General Thinner.
Other Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance
to apply the correct thickness.
Some Important Points To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide. Product
temperature should be minimum 0°C and maximum 35°C. Ambient temperature should be minimum 0°C/32°F and maximum
35°C/95°F. Substrate temperature should be minimum 1°C above dew point and maximum 35°C.
Compatibility/Substrates Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed metals. Also suitable for
factory enamelled finishes.
Number of Coats 3 minimum
Coverage Approx. 1 can per medium-sized outdrive.
Reviews
There are no reviews yet.
Be the first to review “TRILUX PROP-O-DREW GREY” Cancel reply
Reviews
There are no reviews yet.